Home » Topics » Equipment » Drilling Consumables

Drilling Consumables
RSS

Palmer Bit Owner Discusses Getting the Most from Drilling Bits

March 17, 2015

Kevin Christensen shares how to get the most bit bang for your buck.

Halco Rock Tools Increases 4-Inch Hammer Range

Now Offering TD40/QLX40 Shank Option on GP400 Hammer

March 4, 2015

They have increased their 4” hammer range to include a TD40/QLX40 shank optionon their GP400 hammer.

Sullair Releases Enhanced Sullube Air Compressor Lubricant

New Formula by Dow Chemical Company Lasts up to 10,000 Hours

February 21, 2015

The new formulation of Sullube lasts up to 10,000 hours.

Sullair Offering New Air Compressors, Re-Launched Air Tool Line

Teir-4 Final 185, REMAN 375, Air Tools to be Unveiled in Late February

February 19, 2015

A compressor upgraded to meet new EPA emission standards is just one of Sullair's recent developments.

SJE-Rhombus Unveils High Temperature Pump Switch

SJE HiTempMaster Can Handle Up to 200 Degrees Fahrenheit

February 13, 2015

The new SJE HiTempMaster can work with temperatures as high as 200 degrees Fahrenheit.

Final Comments on Bladder Tanks

February 2, 2015

Two months ago I wrote that in my next column I would write about something a bladder tank won’t do, in my opinion, and that is make up for a weak well or slow pump.

Rugged Computers Put the ‘Tech’ in Geotechnical

January 27, 2015

Weather, soil conditions of Indiana highway project put handhelds to the test.

SJE-Rhombus Offers Build-A-Panel PLUS, Increases Control Panel Options

Program Introduces Option In Between Standard and Custom

January 19, 2015

The Build-A-Panel PLUS Program is designed to benefit customers who require additional options beyond what the standard control panel line offers, but do not require a custom engineered solution.

John Schmitt Responds to an Untimely Water Pressure Service Call

December 9, 2014

In my last column I wrote that, on occasion, painted steel bladder tanks will rust from the outside in.

Rockmore International Launches First Hammer in New T Series DTH Line

The ROK 600T DTH Hammer, T Series to be Unveiled at NGWA 2014 Expo

November 20, 2014

Without the traditional plastic components from the bit shank section, foot valve/blow tube breakage while drilling is avoided.

Dig deeper into the drilling and water supply industry!

Build your knowledge with The Driller, covering the people, equipment and technologies across drilling markets.

Copyright ©2025. All Rights Reserved BNP Media.

Design, CMS, Hosting & Web Development :: ePublishing