Be seen. Be heard. Be recognized. Enter The Driller E.G.O. Award Today!

Carbon Capture Drillers Meet Demand from 270 Projects
Environmental Monitoring
More than 270 CCS projects are in development nationwide, spanning everything from ethanol refineries to heavy industry. But each project is a test of technical ingenuity, regulatory patience, and community trust.
By: Austin Keating

Latest News

Crescent Valley Geothermal Production Facility OK’d by BLM
The Crescent Valley project could generate up to 30...
Environmental Monitoring
Could Blackouts Increase 100‑Fold by 2030? DOE Says It’s Possible
Retiring traditional power sources like coal and natural...
Industrial Drilling
No Federal Standards: Localities Shoulder Health Risks of Reused Water
The lack of an overall risk-based approach has resulted...
Environmental Monitoring

The Battle of Bron vs. Brock: Talking Rigs, Regulations, and Real-Life Drilling Stories
Industrial Drilling
In The Driller Newscast #150, Brock Yordy celebrates a major milestone with a special episode that blends heartfelt storytelling with industry insight, with an appearance from his archnemesis, Bron.
By: John Oldani and Brock Yordy

Most Popular

Safety
The Job Site Fit Check: Boots
If your feet aren’t working, you aren’t either. In water well and geothermal drilling, you need boots that do more than just exist—they need to perform.
By: John Oldani and Rachel Bourne
Ask Brock
Ask Brock: Why Do We Keep Talking About Water Laws?
The Driller will keep covering water legislation. Not because we’re repeating ourselves, but because the stakes keep getting higher.
By: John Oldani and Brock Yordy
Water
East Texas at a Crossroads: Water, Lithium, and Energy Dependence
Halliburton will plan and design the first demonstration phase wells in GeoFrame Energy's geothermal and direct lithium extraction (DLE) project in East Texas
By: John Oldani
Industrial Drilling
Can Solar and Geothermal Energy Help a Church and Its Neighbors Wean Off Fossil Fuels?
Spurred by rising utility bills, St. Peter’s-San Pedro Episcopal Church in Salem, Mass., looked for alternatives. Its “Heaven and Earth” plan would loop in much of downtown Salem.
By: Phil McKenna

See More of the Latest

Recommended Content

6 Onsite Phrases Environmental Drillers Hate
Here are six phrases that highlight common frustrations...
Markets
By: Jeff Garby
Pipe Stuck? Common Causes and Solutions for Drillers
If you have drilled for any length of time, sooner or...
Water
By: Wayne Nash
Selecting and Sizing Submersible Pump Cable
This article helps pump installers and servicers decide...
Water
By: Bob Pelikan

New Products

Unmatched Performance P5 P6 P8 DTH Hammers
Eastern Driller Manufacturing’s P5, P6 & P8 DTH...
Drilling Consumables
Toku America’s STRIKER TNB Quarry Breakers Offer Powerful Alternatives
Toku America also offers expert engineering support and...
Mining & Mineral Exploration Drilling
By: The Driller Staff
Inovair Becomes First to Offer BABA-Compliant High-Efficiency Blowers
Inovair’s blower systems are already known for their...
New Products
By: The Driller Staff

Sponsored Content

Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to the The Driller audience. All Sponsored Content is supplied by the advertising company and any opinions expressed in this article are those of the author and not necessarily reflect the views of The Driller or its parent company, BNP Media. Interested in participating in our Sponsored Content section? Contact your local rep!

Built for You: Smarter Drill Rigs, Stronger Support, Bigger Opportunities
A good drill rig manufacturer designs with the operator in mind, adapts quickly to market needs, and helps maximize...
Sponsored byGeoprobe

EAST WEST MACHINERY & DRILLING IS BUYING AND SELLING DRILL RIGS, TOOLING, PARTS, AND SUPPORT EQUIPMENT

WE ARE RE-MANUFACTURED FULL SERVICE FACILITY WITH TWELVE WORK BAYS, WASH ROOM, PAIN BOOTH, AND LARGE WAREHOUSES WITH DRILL TOOLING, PARTS AND COMPONENTS.

EAST WEST MACHINERY & DRILLING IS BUYING…

EAST WEST MACHINERY & DRILLING IS BUYING AND SELLING AIR COMPRESSORS, AIR BOOSTERS, AIR ENDS, FLUIDS & PARTS

East West Machinery & Drilling is Buying and Selling Air Compressors, Air Boosters, Air Ends, Fluids, & Parts.

Full Service Shop w/Pro Paint Booth

All Makes & Models for Sale:

Atlas Copco, Ingersoll-Rand,…

BEEMAN EQUIPMENT SALES ARE NOW DISTRIBUTORS FOR NEW DRILL PIPE

Drill Pipe sizes 4 1/2″ x 20′ Flush Joint and 3 1/2" x 20" Flush Joint

Manufactured by TUBE TECHNOLOGIES
w/ 2 7/8″ IF Threads W/ wrench flats
MADE IN USA!

4 1/2″…

Products
More Products

Water Quality Engineering: Physical / Chemical Treatment Processes
$185.00

Dig deeper into the drilling and water supply industry!
Build your knowledge with The Driller, covering the people, equipment and technologies across drilling markets.
SIGN UP NOW
RESOURCES
Advertise
Contact Us
Directories
Store
Want More
Classifieds
SIGN UP TODAY
Create Account
eNewsletters
Customer Service
Manage Preferences
SERVICES
Marketing Services
Reprints
Market Research
List Rental
Survey/Respondent Access
STAY CONNECTED
LinkedIn
Facebook
YouTube
X (Twitter)
PRIVACY
PRIVACY POLICY
TERMS & CONDITIONS
DO NOT SELL MY PERSONAL INFORMATION
PRIVACY REQUEST
ACCESSIBILITY
Copyright ©2025. All Rights Reserved BNP Media.
Design, CMS, Hosting & Web Development :: ePublishing