www.thedriller.com/articles/85234-face-and-plunge-mill-in-bigger-sizes

Face and Plunge Mill in Bigger Sizes

November 1, 2004


Sandvik Coromant has expanded its offering of CoroMill 210, the milling cutter with the capability for both productive plunge milling and high feed-face milling. Now cutter diameters up to approximately 4 inches are being introduced. Combining two different operations is made possible through the design of the cutter body, insert seat and the inserts themselves. A 10-degree entering angle allows extreme feed rates at small axial depths of cut when the tool is fed tangentially - and also high radial depths of cut when fed axially in roughing operations. Sandvik Coromant, Card No. 196